Changsha Potency Mechanical Technology Co., Ltd.
Dare to think and dare to do !
Add to Cart
5m Drilling Depth Single Pole Rock Drilling and Anchoring and Grouting Equipment KMZ5012 with 1200l/h Grouting Flow
The Potential/Potency KMZ5012 is a versatile drilling and anchoring trolley that has been specifically designed for use in tunnel construction projects. This exceptional piece of equipment is capable of handling drilling, anchoring, and grouting operations for expansion shell anchor rods, resin anchor rods, and single strand anchor rods. With its multifunctional capabilities, the KMZ5012 is the ideal solution for projects that require a versatile and efficient piece of equipment.
One of the key features of the KMZ5012 is that it is the first piece of equipment in China to offer parallel drilling and anchoring operations. This groundbreaking feature allows for quick and efficient installation of anchor rods, providing significant time savings for tunnel construction projects. Additionally, the KMZ5012 is incredibly easy to use and can be operated by just one person, making it an excellent choice for smaller projects or remote work sites where labor is limited.
Overall, the KMZ5012 is an exceptional drilling and anchoring trolley that offers unparalleled performance, versatility, and efficiency, making it the ideal choice for tunnel construction projects of all sizes.
The vehicle's chassis has been engineered to possess four-wheel drive, which gives it a powerful climbing ability. Furthermore, with its four-wheel steering system, the vehicle has a small turning radius, making it highly maneuverable.
The vehicle is equipped with a three working arm frame. The rock drilling arm is situated in the middle, while the left and right arms are anchor rod installation arms, respectively.
The vehicle's control system is managed by a controller, allowing for real-time monitoring of the system's operational status. The information is displayed on a large screen for easy access and convenience.
The intelligent assistance system that controls the n-arm allows for one-click automatic matching of drill rod and anchor rod orientation. This feature improves the efficiency of the vehicle, making it an invaluable asset for any job requiring anchor rod installation or rock drilling tasks.
Below are the technical specifications of the equipment:
1. Weight: 29500 kg
2. Ground Clearance: 480 mm
3. Rock Drill Power: 22 kw
4. Max. Drilling Diameter of Rock Drill: Φ115 mm
5. Drilling Depth of Rock Drill (Single Rod): 5 (Single Pole) m
6. Drilling Speed of Rock Drill: 1-1.2 m/min
7. Water-cooled Diesel Engine:
8. Minimum Turning Radius: Inner≤2.5m；Outer≤8.5m m
9. Gradeability: 20 °
10. Theoretical Maximum Flow Rate of Grouting System: 1200 l/h
11. Maximum Working Height: 12 m
12. Maximum Working Width: 15 m
13. Dimensions in Transport State (Length x Width x Height): 11600*3200*3450 mm
14. Air Compressor Power: 7 kw
In order to install anchor rods/cables through the end working devices of the left and right arm frames on our KMZ 5012, a step-by-step procedure must be followed:
Step 1: Use the remote control to quickly deploy the boom to the vicinity of the anchor hole;
Step 2: Manually place resin or cement coil anchoring agent into the bottom of the hole through a PVC pipe station on the platform;
Step 3: Use the remote control to select the hole position where the anchor rod needs to be installed; After selection, the working device will automatically and quickly adjust its posture to align with the anchor. The orientation of the rod hole is consistent and locked.
Step 4: Use the remote control to install the anchor rod into the friction wheel;
Step 5: Adjust (micro move) the arm movement through the remote control to align the anchor rod with the anchor rod hole;
Step 6: The anchor rod is fed in through the friction wheel until it comes into contact with the anchoring agent (which can be determined by the length of the exposed anchor rod);
Step 7: Anchor rod device in place;
Step 8: Push the anchor rod device forward until the anchor rod is inserted into the bottom of the hole and fix the anchor head; (Resin and cement medicine roll anchoring agent need to be pushed while rotating);
Step 9: Install the exhaust pipe and seal the hole opening; (Manually operated on the platform);
Step 10: Apply prestress; (By applying torque through the anchor rod device torque tube, the torque can be set on the control panel of the electrical control cabinet);
Step 11: Grouting and sealing~~
Our Drilling Anchoring Grouting Equipment product comes with comprehensive technical support and services to ensure optimal performance and minimal downtime.
We offer:
Our team of experienced engineers and technicians are dedicated to providing the highest level of support and service to our customers.
Product Packaging:
Shipping: